📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for FDM TPU 92A: Properties and Industrial Uses. This engineering resource is curated under our 3D Printing division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

FDM TPU 92A is a thermoplastic polyurethane for producing flexible parts with fused deposition modeling (FDM) 3D printing. With a Shore A hardness of 92, the material combines substantial elongation with toughness, durability, and abrasion resistance. For industrial automation teams, these characteristics make it a candidate for prototyping or producing elastomer components such as hoses, seals, protective covers, air ducts, and vibration dampeners.

Material selection still depends on the part’s operating conditions and the direction of applied loads. The published data reports several mechanical properties in both XY and XZ build orientations, so designers should consider orientation alongside the nominal material values when assessing a component.

What FDM TPU 92A offers for flexible parts

Elastomer components can be useful where a design needs to flex, stretch, or provide a compliant interface. FDM TPU 92A brings these material characteristics into an additive manufacturing process, supporting the production of large and complex elastomer parts. This can be relevant when evaluating custom geometries such as ducts, tubes, or covers, where the intended shape is part of the design requirement.

The material is available on Stratasys F123 Series 3D printers and is compatible with QSR soluble support material. That compatibility is relevant when planning parts that need support during printing, although the choice of geometry, orientation, and production setup remains specific to the application.

Mechanical properties and build orientation

The data sheet reports a molded Shore hardness of 92 Shore A. Under ASTM D412 tensile testing, ultimate tensile strength is 16.8 MPa in XY orientation and 17.4 MPa in XZ orientation. Elongation at break is 552% in XY and 482% in XZ. These figures indicate that the material can undergo considerable extension in the reported test, but they should not be treated as a direct prediction of how a finished component will behave in service.

Other reported tensile values include yield strength of 15.6 MPa in XY and 16.1 MPa in XZ, and tensile modulus of 15.3 MPa and 20.7 MPa, respectively. Tensile stress at 100% elongation is 6.9 MPa in XY and 7.6 MPa in XZ; at 300% elongation, it is 11.0 MPa and 11.9 MPa. The differences between orientations show why build direction should be considered when a part experiences repeated or directional loading.

Interpreting test data for component design

Test results help compare material behavior, but application decisions should account for the specific part geometry and loading conditions. A seal, flexible hose, or vibration dampener may be subjected to different combinations of compression, bending, tension, and environmental exposure. The data sheet also reports flexural strength of 1.8 MPa in XY and 2.4 MPa in XZ, with flexural modulus of 25.6 MPa and 36.9 MPa. Flexural strain at break is listed as “No break” in both orientations under the stated test method.

Compression set is reported as 21% after 22 hours at 23 °C and 44% after 22 hours at 70 °C. These values can inform an initial review of parts that are compressed, but the test conditions should be compared with the intended duty cycle and operating environment. They do not, by themselves, establish suitability for a particular sealing application.

Thermal and electrical data to review

Temperature conditions are another important part of material screening. The reported heat deflection temperature is 38 °C at 66 psi and 56 °C at 15 psi. The Vicat softening temperature is 95 °C, while the glass transition temperature is -42 °C. These are distinct test measures and should not be used interchangeably as a single operating-temperature rating.

The data sheet also gives coefficient of thermal expansion values of 139 µm/(m·°C) in the x direction, 159 µm/(m·°C) in y, and 176 µm/(m·°C) in z. The directional values are useful to consider when dimensional change with temperature matters to an assembly or fit. For electrical characterization, volume resistivity is listed as 6.09E+10 ohm-cm in XY orientation and 7.17E+13 ohm-cm in XZ orientation. These figures describe the reported test results; they do not constitute a broader electrical safety or insulation certification.

Where the material may fit in automation

Potential applications identified for FDM TPU 92A include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners. For automation equipment, these are component types where flexibility or a compliant form may be useful. A practical evaluation should connect the part’s function to the relevant material data:

  • For flexible conduits: consider tensile and elongation data alongside the geometry and expected movement.
  • For seals and compressed parts: review compression set results and compare their test conditions with the application.
  • For covers or dampening components: assess the required flexibility and mechanical loading, including the intended build orientation.
  • For temperature-sensitive assemblies: review the listed heat deflection, Vicat, glass transition, and thermal expansion values separately.

This approach keeps material selection tied to the demands of the actual component rather than relying on a general label such as “flexible.”

Conclusion

FDM TPU 92A offers a route to producing complex elastomer parts through FDM 3D printing, with a reported hardness of 92 Shore A, high elongation, and mechanical data across two build orientations. Its listed uses include hoses, tubes, ducts, seals, protective covers, and vibration dampeners. For engineers and integrators, the practical next step is to match the relevant test properties to the part’s loads, compression, temperature exposure, and build direction, then evaluate the design for its intended conditions.

Access Official Technical PDF