Understanding how fluid moves through fractured rock—and how that movement changes under pressure—requires connecting small-scale geometry with larger-scale behavior. A 3D printed fracture network offers a way to study that relationship in a controlled physical sample, combining additive manufacturing with digital rock physics (DRP). The approach can help advance models of flow and poromechanical behavior in fractured and porous materials.
These methods are relevant to subsurface applications where predictions depend on how rock responds to injected fluids, including aquifer behavior, hydrocarbon production, carbon storage efficiency and induced seismicity. The key opportunity is to examine the effects of fracture structure and material properties separately, rather than relying only on naturally variable samples.
Why connect digital rock physics with 3D printing?
Digital rock physics uses imaging and computation to characterize structures within rock and estimate properties such as flow behavior and effective elasticity. A typical workflow begins with a rock sample, uses imaging at multiple scales, and processes the resulting images to identify features. Those features can then support flow, transport, static-property and wave-propagation analyses.
Multiscale imaging is important because fractures and pores do not exist at a single characteristic size. Connecting smaller-scale geometry to larger-scale response can inform constitutive models for poro-hydro-mechanics—the coupled behavior of fluid and solid in porous or fractured materials. Additive manufacturing complements this digital work by making it possible to produce designed structures with complex geometries and engineered material characteristics.
In experimental work, manufactured samples can also help separate the influence of pore structure from variability between natural specimens. This makes it possible to test a defined geometry while controlling aspects of the physical sample and its preparation.
From imaged fracture to printable geometry
The demonstrated design was based on a single fracture system that had been created in a laboratory for proppant testing. In the original work, sand was placed in the fracture and permeability changes were measured under different conditions. Micro-CT scans captured the structure, providing three-dimensional image data for analysis.
A segmented micro-CT image of the fracture, with aperture sizes ranging from approximately 200 to 1,000 microns, was analyzed using lattice Boltzmann simulations. For the configuration containing proppants, the calculated average permeability was approximately 80–90 Darcy. The printing work focused on the fracture network without proppants, allowing the fracture geometry itself to be reproduced and examined.
The digital geometry was prepared as an STL file for additive manufacturing. Initial versions were printed as single pieces using clear resins and stereolithography printers. The printed structures were then scanned with micro-CT at 12-micron resolution, allowing their internal geometry to be inspected and compared with the original image-based design.
Designing samples for flow and mechanical testing
Subsequent designs added practical features for laboratory use. The fracture was divided into printable pieces, with luer-lock ports incorporated at the inlet and outlet so the assembled sample could connect to a flow setup. Design changes also improved the connections, fittings and assembly. A printed gasket was included in one design and was reported to provide at least a water-tight seal.
Micro-CT images of the assembled structure supported analysis of its aperture distribution. In one reported measurement, the mean aperture was 1.745 mm, with a standard deviation of 0.176 mm. Such geometric characterization matters because the manufactured sample is useful only if its relevant structure can be measured and compared with the intended design.
Water-flow imaging provided another way to examine the printed fracture. Images taken with and without water could be compared and processed to distinguish the fluid-filled region. The broader experimental aim was to study coupled hydraulic and mechanical responses, rather than treating flow and deformation as unrelated properties.
Measuring wettability in three dimensions
Wettability influences how different fluids interact with a solid surface and can affect multiphase flow through fractures. Contact angle is often used to describe this interaction, but in a three-dimensional structure it is not necessarily represented by one value. Manual measurements can be time-consuming and may depend on which locations are selected.
An automated three-dimensional contact-angle method was applied to identify fluid interfaces, contact points and contact planes. In the reported analysis, approximately 250 contact angles were captured. The distribution had a mean of 41.5 degrees, a standard deviation of 11.95 degrees, and values from 19.0 to 80.5 degrees. Reporting a distribution makes the variation across the imaged structure visible instead of reducing it to a single measurement.
Printed-material characterization also included surface-roughness measurements using a profilometer and contact-angle measurements. Surface treatments were identified as a way to control wettability. These measurements help describe the manufactured material itself, an important consideration when interpreting flow experiments or comparing printed structures.
Using physical samples to improve models
Physical testing can extend beyond imaging and water flow. The described setup was intended to subject printed fracture samples to loads of up to 100 psi while allowing flow through the sample and laser-scanning imaging. A mini load frame fitted with a laser scanning confocal microscope and pressure-control and permeability equipment was presented as part of this experimental direction.
On the modeling side, the workflow supports simulations of flow and transport in fractures. Examples included multiphase-flow simulations with different contact angles and reactive-transport simulations representing dissolution and precipitation. These applications illustrate how measured geometry and surface behavior can inform numerical studies; they do not remove the need to validate model assumptions against appropriate experiments.
Practical implications for industrial and subsurface engineering
For engineers and technical decision-makers, the value of this approach lies in the combination of designed samples, detailed imaging and computational analysis. It offers a structured way to investigate how fracture geometry, aperture, surface condition and fluid behavior contribute to observed responses. That knowledge can support development of more representative constitutive models and improve understanding of processes in fractured and porous media.
3D printing and digital rock physics are therefore best viewed as complementary tools. Imaging and simulation characterize structures and predict behavior; printed samples provide physical geometries for controlled flow and mechanical tests. Together, they create a pathway for evaluating pore-scale mechanisms while keeping the limits of each sample and measurement in view. Continued characterization of printed materials, wettability and loaded fracture behavior will be essential to translating this methodology into reliable model inputs.
Access Official Technical PDF