In resin-based additive manufacturing, washing is a distinct post-processing step that helps remove uncured material from printed parts. The Loctite 3D Printing EQ Washer DW11 is designed for this task with Loctite 3D Printing resins. Its automated wash cycle, adjustable agitation and separate rinse bath give production and engineering teams a defined process for 3D printer resin washing after printing.
The DW11 is intended for use with Loctite Cleaner C, not isopropyl alcohol (IPA). Understanding that restriction, along with the unit’s two-bath workflow and manual transfer between baths, is important when assessing how it fits into a lab or production environment.
How the DW11’s dual-bath process works
The washer uses two baths: the first contains Loctite Cleaner C for cleaning, and the second contains deionized (DI) water for a final rinse. Each bath has its own adjustable timer, allowing users to set cleaning and rinsing durations according to the application. The product information identifies part geometry and resin type as factors to consider when setting cleaning time.
At the beginning of a cycle, the build head or parts basket is automatically lowered into the active bath. A magnetic impeller circulates the cleaner, with bidirectional agitation intended to reach different part geometries. When the timed cycle ends, the unit automatically raises the build head or basket out of the bath.
The operator then manually moves the build platform or basket from the cleaner bath to the DI-water bath and starts the rinse cycle. The washer automates movement into and out of each bath, but transfer between the two stages is not automatic. This distinction matters when planning operator tasks and the layout of a post-processing area.
Build-head and loose-part workflows
For compatible Loctite PR10 workflows, the build platform can be placed directly into the wash station. This avoids the need to remove parts from the platform before washing. The washer also includes a universal basket for loose parts, providing an alternative when a Loctite build head is not being used.
The DW11 is designed to accept parts from the Loctite PR10 and most DLP and SLA printers, subject to its stated size limits. Maximum acceptable part dimensions are 192 × 110 × 250 mm. The reservoir measures 240 × 173 × 398 mm, and the maximum tank fill is 11 liters. These figures can help teams check whether the equipment is suitable for their part mix, while actual fit should be confirmed before incorporating a component into a routine process.
Adjustable agitation and cycle controls
Part shape, resin type and the desired cleaning process can influence how a wash cycle is configured. The DW11 provides three agitation speeds, bidirectional circulation and a separate adjustable timer for each bath. These controls allow users to tailor the cycle rather than rely on a single fixed wash and rinse duration.
A color touch-screen interface is used to set bath times, select the desired agitation direction and manage the cleaner’s useful life. The washer also includes a cleaner pot-life timer. Users can set this timer according to their application parameters; it then serves as a reminder to change the cleaner bath when its set useful life has elapsed. The reminder supports bath-change management, but teams remain responsible for defining appropriate settings and following their process requirements.
Integration and operating considerations
Before adding the DW11 to a 3D printing workflow, review the equipment’s operating envelope and chemical requirements. The specified power supply is 110–240 VAC, 50/60 Hz, with a rated power of 300 W. The recommended operating temperature is +10 °C to +40 °C (+50 °F to +104 °F). Overall dimensions are 476 × 419 × 589 mm, which can be used to assess the space needed for installation.
- Use the specified cleaner: The washer is for Loctite Cleaner C only and is not for use with IPA.
- Plan the two-stage sequence: Cleaning takes place in Cleaner C, followed by a DI-water rinse in a separate bath.
- Account for manual handling: The operator moves the build platform or basket between baths.
- Set cycles for the application: Adjust timers and agitation settings based on the parts and resin being processed.
- Manage cleaner changes: Configure the pot-life timer to reflect the application’s bath-change parameters.
As with any post-processing equipment, confirm that the washer’s capacity, operating conditions and required handling steps match the intended workflow. The product information also places responsibility on users to determine suitability for their particular application and to adopt appropriate precautions when handling materials.
Practical implications for additive manufacturing teams
The Loctite EQ Washer DW11 brings timed washing and rinsing, bidirectional agitation and automatic vertical movement into a dedicated resin-part cleaning unit. Its support for both a PR10 build platform and loose parts offers flexibility in how parts are presented for cleaning, while the dual-bath design separates the Cleaner C wash from the DI-water rinse.
For engineers and operations teams, the key planning points are straightforward: verify part size, provide space and the specified electrical supply, use Loctite Cleaner C rather than IPA, and account for manual transfer between baths. Configured around those requirements, the DW11 provides a structured approach to 3D printer resin washing without removing operator oversight from cycle setup and bath management.
Access Official Technical PDF