Pneumatic end-effector integration is an important consideration when configuring a collaborative robot for a handling task. The available interface and gripper choices determine what options a system designer can evaluate for a particular application. PHD’s Pneu-Connect offering is presented in single and dual configurations, with the dual Pneu-Connect X2 identified as an option with Freedrive. Five gripper choices are also listed, spanning several parallel styles and an angular micro style.
Pneumatic end-effector integration options
The product overview groups the integration choices into two configurations: a single Pneu-Connect and a dual Pneu-Connect X2 with Freedrive. This gives integrators a defined starting point when considering how to pair a collaborative robot with a pneumatic end effector. The overview identifies the configurations, but does not provide detailed specifications or describe their operating sequences. Those details should therefore be confirmed against the requirements of the specific robot and application before a design is finalized.
In practical planning, the distinction between single and dual configurations is a useful prompt to review the intended gripper arrangement and the way the end effector will be used. A project team can document the required gripping action, the number and type of grippers under consideration, and any robot-side integration requirements. The Pneu-Connect configuration can then be evaluated alongside those application needs, rather than selected by name alone.
The dual option is specifically labeled “Pneu-Connect X2 with Freedrive.” That wording identifies a configuration, but the overview does not explain what Freedrive does or provide conditions for its use. Integrators should consult the relevant product and robot documentation for those details instead of assuming a particular behavior or compatibility from the label.
Five gripper choices for application review
The overview lists five gripper styles. Their names help organize an initial selection discussion, while the actual choice depends on the workpiece and the gripping task. The listed options are:
- Parallel gripper with long jaw travel
- Parallel three-jaw gripper
- Parallel micro gripper
- Angular micro gripper
- Parallel narrow-body gripper
These labels indicate differences in jaw arrangement, travel description, or gripper form. They should not be treated as a substitute for dimensional, force, or performance data: none is included in the overview. Instead, they provide a useful shortlist for determining which products warrant closer review.
Match the gripper style to the task
Start by describing how the workpiece must be held and what the gripper needs to do during the operation. If the application calls for a parallel style, the listed choices include long-jaw-travel, three-jaw, micro, and narrow-body versions. If an angular arrangement is being considered, the angular micro gripper is the option identified in the list. These distinctions can guide an initial conversation, but the source does not specify suitable workpiece sizes or prescribe which gripper is best for any given task.
For a sound selection, compare the workpiece and process requirements with the detailed information for each candidate gripper. Confirm relevant dimensions and operating requirements, and check that the proposed configuration fits the robot and the intended installation. If key application information is not available, resolve it before treating a gripper choice as final.
Plan integration beyond the product label
Choosing a Pneu-Connect configuration and a gripper style are related parts of an end-effector decision, but the overview does not establish that every combination is supported. Confirm the available pairings and installation requirements with the applicable product documentation. This is especially important when evaluating the dual X2 configuration or when a project has specific robot, pneumatic, or workcell constraints.
A structured review can help keep the decision focused:
- Define the handling task and the workpiece requirements.
- Identify which of the five gripper styles merits evaluation.
- Determine whether the single or dual Pneu-Connect configuration is relevant to the intended setup.
- Check product documentation for specifications, supported combinations, and integration details not provided in the overview.
- Review the proposed end effector as part of the complete collaborative-robot application.
This process avoids relying on a product name or general gripper category as evidence of application fit. It also makes clear where additional technical information is needed before equipment is selected or installed.
Conclusion
The Pneu-Connect overview presents a concise set of choices for pneumatic end-effector integration with collaborative robots: a single configuration, a dual Pneu-Connect X2 option labeled with Freedrive, and five gripper styles. For engineers, integrators, and operations teams, the practical value is a clear starting point for application review—not a complete specification. Define the task, compare the gripper arrangements, and verify configuration details against the relevant documentation before making a final selection.
Access Official Technical PDF