Collaborative robot simulation can help manufacturers assess a proposed human-robot operation before changing a physical work cell. In an automotive assembly study, digital manufacturing tools were used to model an existing manual process and compare it with a proposed arrangement in which a collaborative robot performed screw fastening alongside an operator. The second scenario was a simulation, not an implemented production change, but it provided a structured way to examine potential effects on cycle time, output and resource utilization.
Why simulate a collaborative robot before installation?
Introducing automation into a manual station involves more than selecting a robot. Engineers need to understand how tasks will be divided, whether the equipment fits the layout, how the operator and robot can work in parallel, and what the change could mean for the wider production system. Digital manufacturing simulation supports this evaluation by representing products, processes and resources in a virtual environment.
In the study, the team created a digital model of an automotive assembly line and focused on one workstation where a subassembly was built. The model used factory-provided information, including the layout, assembly sequence, task times, resources and Methods-Time Measurement data. Process Simulate was used to represent the work cell and its operations; Plant Simulation was used for discrete-event analysis of production flow and utilization.
First, the existing manual process was modeled and checked against the supplied process-time data. The model represented the stationās assembly sequence and physical arrangement, including the bench, tools, intermediate buffers and finished-part location. Matching the virtual process to the existing operation provided a basis for comparing it with the proposed robot-assisted scenario.
What changed in the proposed work cell?
The modeled collaborative arrangement retained the operatorās role in handling and positioning parts, while assigning screw fastening to a robot mounted at the workstation. The operator positioned screws and parts; the robot used a screwdriver tool to perform the fastening. The scenario also allowed the operator to carry out a clip-checking task while the robot was completing its screw-driving work.
This task overlap is central to the modeled change. Rather than treating the robot as a standalone replacement for the operator, the scenario combined manual and automated work within the same station. The simulation represented the equipment in the existing layout and considered access to materials, tools and operator movement space. Such spatial detail matters when assessing whether a proposed process can be arranged in a real cell.
The study described the robotās fastening operation using the process torque and tolerance specified in the model. Those values belong to the particular assembly process and should not be treated as general settings for other applications. In a real deployment, process requirements, equipment selection and safety controls would need to be assessed for the specific task and installation.
Simulation results: station-level gains, not a line-wide guarantee
In the modeled manual scenario, the station cycle time was 140 seconds per part, with simulated daily productivity of 544 pieces. For the proposed collaborative process, the reported cycle time was 106.99 seconds, and simulated daily productivity was 674 pieces, based on the same available production period. The modeled station cycle time therefore fell by about 33 seconds.
The analysis attributed the difference to transferring screw fastening to the robot, reducing some movements associated with accessing fastening points, and allowing the operatorās clip verification to overlap with robot operation. In the collaborative scenario, robot utilization was reported as 32.77%, while operator utilization was about 46.9%, compared with 89.9% for the manual process. These figures describe the modeled station and its assumptions; they are not measurements from a robot installed on the production line.
There is an important systems-level qualification: the station was part of a serial production line. A faster cycle at one workstation does not automatically increase total line output if another station becomes the constraint or the lineās pacing remains unchanged. The authors explicitly noted that the local cycle-time reduction would not, by itself, change the entire lineās performance. For operations leaders, this is a reminder to evaluate bottlenecks and downstream effects alongside workstation metrics.
What engineers can learn from the modeling approach
The case illustrates a practical sequence for evaluating automation virtually:
- Establish a credible baseline. Use actual process information and compare the model with the existing operation before testing changes.
- Represent the work cell faithfully. Include layout, resources, task sequence and movement requirements so the proposed arrangement can be assessed in context.
- Make task allocation explicit. Identify which activities remain with the operator, which move to the robot and which may occur in parallel.
- Assess multiple measures. Review cycle time, simulated output, and both operator and robot utilization rather than relying on a single result.
- Keep assumptions visible. Distinguish validated baseline data from proposed-process assumptions, and treat projected results accordingly.
Process visualization can also reveal physical-space and ergonomic considerations that may be difficult to judge from cycle-time tables alone. Discrete-event simulation adds a production-flow perspective, helping teams examine how a modeled station behaves over the operating schedule. Together, these methods can inform planning before physical changes are made.
Using virtual results to guide decisions
The case demonstrates the value of collaborative robot simulation as a decision-support tool, not as a substitute for implementation validation. Its baseline reflected factory data, while the robot-assisted scenario remained a proposal. The modeled improvements therefore indicate potential under the stated assumptions; they do not establish that the same results would occur after installation.
For manufacturers considering human-robot collaboration, the practical implication is to use digital models to test task allocation, layout and station-level performance before committing to changes. Then assess the proposed cell within the constraints of the full line and verify relevant operational and safety requirements for the actual application. This approach gives engineering and operations teams a clearer basis for deciding whether a collaborative robot merits further evaluation.
Access Official Technical PDF