In packaging and material handling, a collaborative robot may need to serve positions that span a greater height than its own working range allows. A collaborative robot linear axis addresses this challenge by moving the robot base vertically, extending where the arm can operate without requiring a taller robot or a more complex multi-axis arrangement. Ewellix LIFTKIT is a ready-to-mount vertical axis designed for Universal Robots applications, including palletizing and other pick-and-place tasks.
Why add a linear axis to a collaborative robot?
Palletizing illustrates the reach problem clearly. Boxes may be stacked from floor level to a pallet load as high as 2 m, while a standard collaborative robot may not have enough vertical working range to serve the full stack from one fixed position. If the robot cannot reach the required positions, the system designer must find another way to cover the height range.
With a lift axis, the robotâs base rises or lowers as the task progresses. This allows the arm to work from a more suitable position as the stack changes height. For packaging-system manufacturers, adding a preconfigured vertical movement can also help simplify the design of a multi-axis application. The axis extends the robotâs positioning options; it does not change the robot armâs own specifications.
LIFTKIT operating range and integration
LIFTKIT uses a robust telescopic pillar intended for industrial use. The product literature describes vertical lifting of up to 900 mm, while the technical data lists stroke options from 500 to 900 mm. The retracted length depends on the selected stroke: the listed formulas are stroke divided by two plus 265 mm for the hardware and plus 275 mm for the software-controlled configuration.
The axis is designed to integrate with Universal Robots models UR3, UR5 and UR10. The technical data also lists compatibility with e-Series robots. The product is Universal Robots+ certified, and its software control is integrated into the robot controller using URCaps. This allows the axis to be set up and incorporated into robot motion programs within the Polyscope environment.
Key technical considerations
- Load and motion: The stated push load is 1,500 N, with a pull load of 0 N. The listed speed is 80 mm/s.
- Positioning: Positioning repeatability is specified as ±1 mm, with any positions accessible and position feedback available through URCaps.
- Construction: The pillar cross-section is 163 mm by 163 mm, and the enclosure rating is IP40. The stated ambient temperature range is +10 to +40 °C.
- Power options: The technical data lists 24 V DC, 120 V AC and 230 V AC options. Available configurations vary by electrical option and cable selection.
These figures help engineers assess whether the axis fits the applicationâs travel, load, environment and power requirements. Final selection should also account for the robot, end-of-arm tooling, payload, mounting arrangement and complete machine design; the listed axis specifications alone do not define the capacity of the full robot system.
Programming and commissioning the cobot lift axis
In the installation tab, an operator can manually move the axis in either direction and define user-specific positions. Those positions can then be accessed in programming mode. To include vertical movement in a robot program, the user inserts the LIFTKIT URCaps command module at the appropriate point in the program structure. The documentation also describes using script functions to read and set positions.
Soft start and stop are implemented for smooth operation. This helps the axis move in a controlled manner as part of the programmed sequence, but application-specific commissioning remains important. Engineers need to confirm that axis travel, robot motion, tooling and the workpiece path are coordinated for the intended task.
Safety and system-level design
LIFTKIT includes safety elements, but the manufacturer states that the axis is not a functional safety system compliant with EN ISO 13489-1 or IEC 62061. If the axis is to be part of a functional safety chain, external safety devices must be integrated into the overall system. Safety assessment therefore belongs at the machine or application level, rather than being assumed from the presence of the axis or its controller connection.
Installation planning should also include cable routing. The pillar and interface plate have threads for attaching cable-management hardware; an example cable chain is shown in the documentation but is not included with LIFTKIT. Designers should allow for the required cable management and verify clearances throughout the full stroke.
Practical implications for packaging automation
For integrators and plant teams, a vertical axis offers a way to extend a collaborative robotâs working range when handling tasks demand greater height coverage. In palletizing, moving the robot base can help the arm reach different levels of a growing stack. The plug-and-play approach and URCaps integration are intended to make the axis straightforward to incorporate into compatible robot applications, while the defined stroke and positioning data support initial engineering checks.
Before selecting a configuration, confirm the required travel, robot compatibility, mounting and power needs, cable-management approach, and safety architecture. A collaborative robot linear axis can provide a practical building block for a wider-range pick-and-place or palletizing cell, but its value depends on how well the complete application is engineered and commissioned.
Access Official Technical PDF