3D printing safety is not limited to preventing contact with a hot printer or moving parts. Additive manufacturing can introduce risks at the equipment, material, production and finished-product stages. For industrial automation teams and smaller manufacturers alike, managing those risks requires attention to operating conditions, material handling, quality control and the intended use of each part.
A 2019 risk-review presentation by U.S. Consumer Product Safety Commission (CPSC) staff outlined hazards associated with printers and 3D-printed products. The presentation noted that it had not been reviewed or approved by the Commission and might not reflect its views. Its central practical message is that a partâs safety depends on more than the printer: materials, process choices, finishing, durability and end use all matter.
Why additive manufacturing changes the safety picture
In 3D printing, material is built up in layers to create a part or product. The broad term covers diverse processes, including fused filament fabrication, stereolithography, selective laser sintering, material jetting and metal powder-based methods. These processes use different materials and equipment, so hazards and suitable controls cannot be assumed to be identical across technologies.
The distinction between small-scale 3D printing and large-scale additive manufacturing is not always a matter of printer size. The production context also includes how raw materials are purchased and stored, how parts are produced and finished, and how products are used and disposed of. A desktop printer may operate in a school or home, while small printers may also be used within larger manufacturing environments. As printing becomes more accessible, production can take place outside facilities with established engineering and safety expertise.
3D printing safety starts with the printer
Printer hazards include fire, electric shock and mechanical risks. Potential fire contributors identified in the review include thermal runaway, failures in maximum or minimum temperature checks, cooling-fan failure, combustible or explosive dust, and printing without supervision. The risk may be greater when detection or suppression measures are absent at the printerâs location.
Electrical and fire risks can also arise from unsuitable components or product designs. The presentation highlighted improper flame retardants or ultraviolet inhibitors and insufficient mechanical barriers as possible concerns. Product certification to a relevant voluntary standard was identified as a way to mitigate printer-related hazards. For facility teams, equipment selection and installation should therefore be considered alongside operating practices and the conditions where printing takes place.
Material handling and chemical exposure
Understanding the material is essential. Additive manufacturing can involve polymers, metals, ceramics, nanomaterials and other substances. The safety assessment needs to consider what a material contains and whether it is appropriate for its intended setting, particularly when printing occurs in a home, school or other occupied indoor space.
Exposure questions extend across the process:
- Storage: Are raw materials packaged and stored safely?
- Production: What substances, including volatile organic compounds, particulates or metals, may be released during printing?
- Indoor conditions: Could released substances accumulate in the environment?
- Controls: What engineering controls or personal protective equipment are appropriate for the material and process?
- Finishing and use: Do finishing steps introduce additional concerns, and could a product degrade and release chemicals during its lifecycle?
The review also raised questions about material toxicity and exposure limits. Those questions cannot be answered by treating all printers or feedstocks as equivalent. Material choice, process and use environment must be considered together.
Printed parts need quality and durability controls
Additive manufacturing can produce designs that are difficult or impossible to make using traditional methods. That flexibility also means designers and engineers must assess mechanical performance in the context of the specific material and process. Raw materials can have different mechanical properties, and post-production treatments may be limited; the presentation specifically noted heat treatment of metals as an example of a process consideration.
Quality assurance and quality control are another challenge. If each part is treated as a prototype, manufacturers need a way to evaluate whether the process consistently produces parts that meet their requirements. Changes in materials or production conditions can affect the part, while corrective action may be more complex when many similar but individually produced items are involved. Durability matters beyond initial inspection: a product that degrades may lose performance or release chemicals over time.
Consider the hazards of the finished product
A printer that operates safely does not guarantee that its output is safe for its intended use. The CPSC staff presentation raised concerns about flammability compliance, material compatibility and degradation in printed products. For products intended for children, it highlighted potential choking hazards from small parts, possible phthalate exposure, durability and the proper marking of replica toy guns. It also questioned whether printed products would meet applicable mandatory or voluntary standards.
These concerns are especially relevant to distributed manufacturing, where local businesses may acquire advanced equipment without equivalent training or in-house science and engineering expertise. Organizations should identify applicable product requirements, establish material and process controls, and define suitable testing before products are put into use or supplied to others. The presentation does not provide one universal test plan; requirements depend on the product, process and intended application.
Build safety into the whole production lifecycle
Effective risk management for additive manufacturing spans raw-material purchasing, safe storage, printer operation, finishing, product testing, use and disposal. It also depends on workforce knowledge: operators and designers need practices suited to the equipment and materials they handle. Open-source designs and software can broaden access, but they do not replace manufacturing expertise or product-safety assessment.
Standards development and research are part of the broader response. The 2019 presentation described CPSC staff involvement in work related to printer safety, emissions measurement and mechanical testing, alongside coordination with other organizations. For manufacturers, the practical takeaway is to monitor relevant standards activity while maintaining controls appropriate to their own production and products.
Conclusion
Additive manufacturing expands design and production options, but it also changes where and how product risks must be managed. Treat printer safety, material exposure, part quality, durability and end-use compliance as connected responsibilitiesânot separate checks. A lifecycle-based approach helps industrial teams and distributed manufacturers identify hazards early and make informed decisions about equipment, processes and printed products.
Access Official Technical PDF