For CNC panel machining, selecting a cutter is only part of building a reliable tooling setup. The ThermoGrip tool holding system described in this tooling promotion pairs heat-shrink chucks with diamond router cutters, with the stated aim of supporting tool concentricity, cutting performance and service life. Understanding the relationship between the cutter, its shank and the machine interface helps engineers and production teams assess whether this type of setup fits their process.
The listed promotion ran from October 1 through December 31, 2019. Its prices and special offers are historical and should not be treated as current availability or pricing. The technical details, however, illustrate the range of PCD router tooling and heat-shrink equipment offered for CNC applications.
PCD router bits for panel machining
DiaMaster PRO PCD router bits are presented for sizing and nesting cuts in panel products and abrasive materials. The listed cutter families include Z1+1, Z2+2 and Z3+3 configurations, as well as a panel groover. The source also lists a DiaMaster Quattro Z2+2 cutter. These variants provide options across different cutter diameters, cutting lengths and shank sizes; the appropriate choice depends on the machining task and the machine’s tooling requirements.
In the product dimensions, CL refers to cutting length, OAL to overall length and SH to shank diameter. The promotion lists Z1+1 cutters with 1/2-inch or 3/4-inch shanks, Z2+2 options with shanks from 3/8 inch to 3/4 inch, and Z3+3 options with 1/2-inch shanks. Those dimensions are selection details, not interchangeable specifications: confirm the cutter’s dimensions against the programmed operation, available clearance and compatible tool holder.
Edge finishing for delicate surfaces
The DiaMaster EdgeExpert 22+2+ Z3+3 is specified for machining delicate laminates, foils and veneers. Its described alternate shear angle is intended to support tool life and finish quality, and pre-cutting is recommended. The listed design can be resharpened five to seven times, according to the promotion. As with any finish-sensitive operation, the tool description should be considered alongside the material and the requirements of the cut.
Why the tool holder matters
Leitz recommends heat-shrink technology for its custom and diamond router bits, stating that it helps optimize concentricity, performance and service longevity. A heat-shrink holder clamps the tool through a close-fitting shank interface. The promotion emphasizes ThermoGrip chucks’ rigidity, accuracy and balance quality, and notes that the clamping system has no moving parts. It also identifies reducing lines on a workpiece associated with collet wear as a potential advantage.
These characteristics matter because a cutter and holder operate as a single assembly. Tool compatibility requires attention to the shank diameter and tolerance, as well as the machine-side interface. The promotion states that the tool shank must fall within the specified tolerance for functionality and that this requirement is automatically fulfilled when using Leitz tools. It also recommends ThermoGrip chucks for the listed DiaMaster cutters.
Matching a chuck to the CNC machine
The historical offer covered several machine-interface options: HSK F63, SK30 and an ISO30 chuck for CMS machines. The HSK F63 selection included holders for shanks from 1/4 inch through 1 inch, as well as 20 mm and 25 mm options. The listed SK30 and ISO30 models were for 1/2-inch shanks. These are examples from the promotion, not a complete compatibility guide.
Before ordering or changing a holder, verify the machine interface, tool shank size and required shank tolerance. For the listed SK30 chuck, the buyer was asked to specify the machine make and model so the proper pull stud could be supplied. Confirming this information with the machine and tooling documentation can help prevent a mismatch between the holder and the spindle setup.
Induction shrinking equipment
The promotion also included two induction shrinking units for shops adopting heat-shrink tool holding. The ISG2430 TLK-3.2-F5 was specified for carbide tool shanks from 3 to 20 mm. Its listed features included a high-frequency generator, optimized coil geometry and an integrated fan for cooling the heated chuck. The unit was specified for 3 × 208 V, 15 A power and weighed 45 kg.
The ISG3430TLK was described as a processor-controlled unit for carbide tools from 3 to 32 mm and HSS tools from 6 to 32 mm. Its listed electrical requirement was 3 × 480 V, 16 A, and it also weighed 45 kg. The source describes a coil-changing system for handling the stated range. These requirements make it important to check available electrical service, tool-shank range and installation needs when evaluating an induction unit.
Practical considerations for tooling decisions
- Start with the operation: Identify whether the work involves sizing, nesting, grooving or machining a delicate laminate, foil or veneer.
- Verify dimensions: Match cutter diameter, cutting length, overall length and shank diameter to the application and machine setup.
- Check the full interface: Confirm holder type, shank tolerance and any machine-specific requirements, including the pull stud where applicable.
- Assess shrinking capacity: Compare the induction unit’s supported shank range and electrical requirements with the tools and facilities in the shop.
The promotion also advertised discounts on certain chuck-and-router-bit combinations and induction-unit orders, plus a 30-day on-site trial for an induction unit. Those offers were limited to the stated 2019 promotion period and are not current terms.
Conclusion
Choosing PCD router bits and heat-shrink holders is a system-level decision involving the cutting task, workpiece material, tool dimensions and CNC machine interface. The DiaMaster range illustrates options for panel sizing, nesting, grooving and delicate-surface machining, while the ThermoGrip and induction-unit listings show the holder and equipment considerations that accompany heat-shrink tooling. For current purchasing decisions, verify specifications, compatibility, availability and pricing directly with the tooling supplier.
Access Official Technical PDF