Predictive maintenance helps industrial teams make maintenance decisions based on the condition of equipment rather than relying only on fixed schedules or waiting for a component to fail. By using asset data to identify unusual behavior and estimate time to failure, organizations can plan interventions when they are warranted. The aim is to extend useful equipment life, reduce unscheduled downtime and balance maintenance costs against asset utilization.
Putting that aim into practice requires more than installing sensors or applying an algorithm. Teams need relevant operating data, a clear understanding of the failures they want to predict, and a process for acting on the resulting insight.
Where predictive maintenance fits in the maintenance strategy
Maintenance approaches involve different trade-offs. With corrective maintenance, a part is replaced after it fails. This can make full use of component life, but a failure may also cause downtime, require labor at inconvenient times or locations, and create health, safety or environmental risks.
Preventive maintenance takes a scheduled approach: teams estimate a component’s useful lifespan and maintain or replace it before expected failure. This can help avoid unscheduled or catastrophic failures, but scheduled downtime, labor and the possibility of replacing a component before its useful life is over remain considerations.
Predictive maintenance seeks a balance between the two. It uses information about an asset’s condition to guide the timing of work, aiming to replace components when they are approaching failure rather than automatically at a preset interval or only after they break. When the predictions are useful, maintenance teams can plan work and parts requirements around a more informed view of asset condition.
Predictive maintenance begins with the right data
Anomaly detection is one common technique: it identifies behavior that differs from what is expected. For a predictive maintenance program, the challenge is to collect data that can help reveal developing problems and support an estimate of time to failure.
Vibration sensors are one way to gather indirect information about equipment condition. However, in many machines, operational data is already generated by the sensors, actuators and control units that govern how the equipment runs. Accessing this runtime data can provide a direct view of machine behavior without relying only on additional measurements.
In vehicles and some industrial machinery, control units and sensors communicate over a Controller Area Network, or CAN bus. Where a machine uses CAN bus, a data logger can be used to capture information from that stream and transfer it for analysis, including to a cloud environment. The data may then be transformed into scaled engineering values before it is used in a predictive model. The appropriate collection method depends on the equipment and the data available.
Three steps: collect, predict and react
1. Collect relevant operating information
Start by identifying data that can help explain equipment behavior and the failures under consideration. This may include operational measurements as well as static information about the system, such as mechanical properties, typical usage and operating conditions. More data is not automatically better: data collection should be guided by the prediction task.
2. Build and use a predictive model
Once collected, data can be processed and used in a model. Methods can range from a threshold applied to one variable to more advanced machine-learning algorithms. The model should be selected in relation to the data and the failure pattern being addressed; complexity alone does not establish whether a model will be useful.
Building a failure model also depends on having enough historical data to capture information about events leading up to failure. The available history, the definition of a failure and the machine’s operating context all affect what the model can learn and what its predictions mean.
3. Turn estimates into maintenance action
A model may estimate time to failure for an asset or its components. Those estimates become operationally valuable when they inform a response. Depending on the organization’s process, teams could use them to schedule maintenance, notify staff of potential breakdowns or plan spare-parts inventory. The prediction is an input to decisions, not a substitute for a defined maintenance workflow.
Define the failure before collecting more data
Before building a model, engineering and maintenance teams should agree on the problem they want it to solve. Useful questions include:
- Which failure types matter? Specify the failures the model is intended to predict rather than treating every fault as the same event.
- How does each failure develop? A slow degradation process may leave a different data pattern from an acute failure.
- Which components or operating conditions are relevant? Identifying likely relationships helps focus data collection and analysis.
These questions are especially important where standard condition-monitoring methods do not fit the equipment. For example, predictive maintenance has been applied to electromechanical shovels, where harsh operating conditions and limitations in available analysis approaches can make conventional monitoring challenging. Traditional vibration analysis is widely used for rotating machinery, but methods based on Fourier transforms assume constant rotational speed. That assumption may not suit a shovel, so a different analytical approach is needed.
Make the process actionable
Predictive maintenance is most useful when data, failure analysis and maintenance planning are connected. Teams should define target failure modes, assess what historical and runtime data are available, and choose modeling methods suited to the equipment and its behavior. They also need a practical route from an estimate to a maintenance decision, whether that means planning a repair, alerting staff or reviewing parts needs.
For industrial organizations, the practical goal is not simply to predict failure. It is to use evidence about asset condition to make better-timed maintenance decisions—seeking to preserve component life while reducing dependence on both premature scheduled replacements and costly, unscheduled repairs.
Access Official Technical PDF