📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for CNC Machining Design Guidelines for Better Parts. This engineering resource is curated under our CNC Machining division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

Good CNC machining design starts with a clear understanding of how a part’s geometry affects cutting, workholding and inspection. Small changes—such as adding internal corner radii, relaxing noncritical tolerances or reducing the number of setups—can make a component easier to manufacture while preserving its required function.

The following design considerations apply to machined parts made from a range of metals and plastics. They are useful when preparing drawings for a prototype or a production run, and when discussing manufacturability with a machining supplier.

CNC machining design guidelines: balance precision and practicality

CNC machining can provide high speed, high dimensional accuracy and good surface finish. It also supports a wide selection of materials and can be used for both one-off prototypes and high-volume production. However, complex geometries and larger parts can be expensive to machine, so design decisions should account for the effort needed to produce each feature.

Where the part’s function allows, consider these design measures:

  • Relax tolerances on noncritical features. Tighter tolerances can require additional machining and verification. Specify them where they matter to fit, function or assembly rather than applying them unnecessarily across the drawing.
  • Keep features accessible from the six sides. Designing features perpendicular to the part’s six sides can help simplify access during machining.
  • Reduce the number of setups. A setup is a workholding arrangement used to machine a part. Geometry that can be produced with fewer repositioning steps can help limit manufacturing complexity.
  • Keep the design simple. Avoid adding detail that does not contribute to the part’s purpose.

For the capabilities described in the design guide, the maximum part size is 3000 × 1200 × 850 mm. Confirm size and other project-specific requirements with the supplier during design review.

Set tolerances according to function and material

The stated standard tolerances are according to ISO 2768-1. As a general reference, the tightest standard tolerances are ±0.05 mm for metals and ±0.2 mm for plastics. Other tolerance requirements are discussed per project.

These values are not a reason to apply the tightest tolerance to every dimension. Identify which dimensions control assembly, alignment or operation, and distinguish them from features that can accept more variation. Clear drawings help the machining team understand where precision is essential.

Design pockets, walls and holes for machinability

Allow for internal corner radii

Milling tools are round, so cavities and pockets will have an internal radius rather than a perfectly sharp inside corner. The recommended relationship is r > 1/3 × d, where r is the internal radius and d is the pocket depth. Accounting for this in the design avoids specifying a corner geometry that the machining process cannot produce as drawn.

Avoid walls that are too thin

Thin walls can warp during machining, affecting the part’s accuracy. Recommended minimum wall thicknesses are greater than 0.8 mm for metal and greater than 1.5 mm for plastic. These are design recommendations; review the geometry and project requirements with the supplier when a thinner wall is necessary.

Use practical hole sizes and depths

For holes less than 20 mm in diameter, design around standard drill-bit sizes, using metric sizes where possible. Standard sizes help keep hole features aligned with common tooling.

For a hole of diameter d and depth L, the general suggested limit is L < 10 × d, while L < 5 × d is preferred. Deeper holes may require additional consideration, so avoid specifying depth beyond what the part’s function requires.

Specify threads and markings clearly

Machined threads can include metric, imperial UNC and UNF, and pipe threads, among others. Mark every required thread clearly on the 2D drawing so its type and location are unambiguous. A thread length of 3 × the hole diameter is recommended.

For text and logos, engraved details are generally preferable to embossed features because engraving removes less material. Recommended text is at least 5 mm high and 0.8 mm deep, with at least 0.5 mm clearance between letters. A sans-serif style is suggested to keep markings legible and straightforward to machine.

Choose material and finish with the application in mind

Material selection affects both the part and the machining approach. The listed options include ABS, polycarbonate (PC) and acrylic plastics, as well as stainless steel grades 304 and 316 and aluminium grades 6061 and 7075. Other materials may also be available, so confirm suitability for the application and project.

Surface finishing options include polishing, sand blasting, painting and plating. Specify the required finish on the drawing or in the project documentation, and consider how it relates to the part’s purpose and appearance.

Conclusion: make manufacturability part of the design

Effective CNC machining design is a matter of matching geometry and tolerances to functional needs. Internal radii, adequate wall thickness, practical hole proportions, clearly defined threads and sensible marking dimensions give the machining process workable features to produce. Combined with appropriate materials, finishes and fewer setups, these choices can help control complexity without compromising the requirements of the part.

Access Official Technical PDF