📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for AMR Safety Systems: Protect People and Improve Productivity. This engineering resource is curated under our Autonomous Mobile Robots division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

AMR safety systems are central to integrating autonomous mobile robots into busy production and warehouse environments. Robots must share space with workers, vehicles, goods and changing workflows, so safety depends on more than detecting an obstacle: the system must assess the situation and respond appropriately. A coordinated design can help protect people while supporting efficient movement and reducing unnecessary stress on material handling equipment.

What a Performance Level D safety system does

Performance Level D (PL d), as defined by ISO 13849, describes a level of reliability for safety-related control systems. The source material gives a probability of dangerous failure per hour in the range of 10-7 to 10-6. In an AMR, safety-rated components work together to monitor the vehicle and initiate a safe response when conditions become hazardous. PL d is a system reliability classification, not a guarantee that collisions or injuries cannot occur.

A typical architecture may include safety laser scanners, a safety controller, encoders, relays and a data gateway. Each component has a role: sensors detect objects and vehicle motion, the controller evaluates safety conditions, and the actuation path carries out a stop when required. A gateway can also make safety and operational information available to the vehicle’s onboard computer.

How the main components work together

  • LiDAR: Light Detection and Ranging measures distance by timing reflected light. Safety-rated scanners can monitor protective fields around a vehicle, while other LiDAR sensors may support navigation and mapping.
  • Safety controller: This evaluates scanner and sensor inputs against the configured safety logic. If the system determines that the vehicle is unsafe, it initiates the appropriate stopping response.
  • Encoders: These measure motion, such as wheel speed or steering position. Their data can help the system understand not only how fast a robot is moving, but also its direction.
  • Relay and gateway: A safety-rated relay can switch vehicle power as part of a safety response. A communications gateway can pass relevant safety and non-safety data between sensors, the safety system and onboard computing.

AMR safety systems need to account for direction

Traditional line-following AGVs generally operate along defined routes and may stop when an obstacle blocks the path. In more dynamic settings, autonomous navigation can give a vehicle greater flexibility, but its safety field must still reflect how it is moving.

A protective field acts like a virtual boundary around the robot. If the system detects an object inside a field, it can issue a stop command. The field’s shape and size matter: a broad field may trigger stops for objects that are nearby but not actually in the vehicle’s path, while an inadequately configured field may not provide appropriate protection.

In the system described in the whitepaper, two encoders provide complementary information: one measures wheel speed and another measures steering angle. The safety system can use these inputs to adapt the protective field to the vehicle’s speed and direction. A faster-moving robot may need a larger field; when its wheels turn, the field can shift toward its intended path. This direction-aware approach can help avoid unnecessary stops and support more efficient use of available aisle space. Actual field dimensions and aisle requirements depend on the vehicle, application and safety assessment.

Using multiple LiDAR sensors for navigation and awareness

Safety scanners and navigation sensors can serve different purposes. The whitepaper describes safety laser scanners that provide protective fields, alongside a non-safety-rated 2D LiDAR sensor for long-range navigation. It also notes a scanner configuration with a 275-degree scanning angle and up to 128 protective fields, and a long-range sensor specified for detection up to 180 metres. These are examples from the described system, not universal specifications for AMRs.

Combining safety-rated sensing with navigation LiDAR can help a robot monitor its surroundings while planning movement through a facility. Mapping and fleet-management software can use LiDAR data to build a facility map and help robots select routes between process locations. If traffic obstructs a route, route planning may offer another path, subject to the system’s capabilities and site configuration.

Why braking strategy affects equipment life

Not every stop needs to cut vehicle power immediately. An emergency stop that abruptly removes power and engages a parking brake can place mechanical stress on braking components, particularly when used repeatedly as the default response. Parking brakes are intended to hold a vehicle stationary; relying on them for frequent shock stops can contribute to wear.

A controlled safety stop can instead use the robot’s normal motion-control system to decelerate. In the approach described in the source, a safety-rated motion monitoring module checks vehicle speed and verifies that the commanded stop occurs. If the standard control system does not bring the vehicle to a stop within the defined conditions, the safety system can escalate to cutting power. The mechanical braking system remains an additional protective measure.

This distinction is important for system integrators and plant teams: stopping logic should be designed to protect people first, while avoiding unnecessary emergency braking where a validated controlled stop is appropriate. The safety response must be selected and verified for the specific robot and operating environment.

Practical considerations for deployment

When evaluating an AMR installation, consider how its safety architecture fits the facility’s traffic patterns, aisle layout and task requirements. Review how scanners are positioned, how speed and steering data affect protective fields, and how the system distinguishes a controlled safety stop from an emergency stop. Confirm as well what operational data is available to diagnose stops and understand their causes.

  • Assess the routes and areas where people and mobile equipment share space.
  • Check whether the protective fields account for both vehicle speed and direction.
  • Understand how safety sensors, controllers, encoders and braking mechanisms interact.
  • Consider how maps, fleet routing and stop-event data can inform operational planning.

Conclusion

Effective AMR safety systems combine sensing, motion monitoring, safety logic and braking into a coordinated design. Direction-aware protective fields can help robots respond to hazards without stopping for every nearby object, while controlled stopping can reduce reliance on abrupt emergency braking. For industrial teams, the practical goal is a configuration that is validated for the site, protects workers and supports reliable material movement.

Access Official Technical PDF