Additive manufacturing in naval maintenance is not simply a matter of putting a 3D printer aboard a ship. It requires approved materials and processes, controlled technical data, secure file handling, suitable installation conditions and a clear path for qualifying parts. NAVSEA’s strategy, as described in 2019, treats additive manufacturing (AM) as another manufacturing method within the broader engineering, acquisition and maintenance system—not as a substitute for established controls.
That approach offers a useful framework for industrial organizations considering distributed manufacturing. The operational value of producing or developing a part closer to where it is needed depends on connecting design, production, quality, logistics and workforce requirements.
Building the engineering and approval framework
NAVSEA identified standards, technical data packages and materials knowledge as foundational requirements. AM processes can vary with equipment, material and manufacturing parameters, so a digital model alone is not enough to establish that a component is suitable for service. Engineering requirements and production information must support assessment, traceability and repeatable decision-making.
NAVSEA guidance released in August 2018 set out a decision and approval process, definitions, process considerations, material requirements and technical data package requirements for shipboard components. It also addressed polymer fire, smoke and toxicity considerations, metallic materials, and the submission and approval of components intended for shipboard installation.
The guidance did not cover every application. It excluded systems and facilities under Naval Reactors and Strategic Systems Programs, and it did not provide guidance for installing AM equipment aboard ship. The source also specified that polymer AM material was not permitted on submarines without NAVSEA approval, noting that material off-gassing required further investigation. These boundaries illustrate why application-specific authority and review matter.
In parallel, NAVSEA was advancing process specifications, including a powder bed fusion specification and a draft directed energy deposition specification, while engaging standards development organizations and industry. The broader objective was to establish a basis for using AM in design, acquisition, maintenance and operations.
AM approval depends on risk and technical data
Approval is a progression, not a blanket authorization for every part or printer. NAVSEA’s 2019 status summary distinguished applications submitted for assessment, low-risk applications delegated to local technical authorities, and applications with technical authority approval. At that point, the reported counts were 584 submitted, 85 in the low-risk category and three with technical authority approval. The figures describe the status reported in that material; they should not be read as a general approval rate or as permission to manufacture unrelated components.
For applications requiring technical authority approval, the approved technical data package specified materials and printers. This makes configuration control central to AM governance: a part’s suitability is tied to the approved production conditions and supporting data, not just its shape.
NAVSEA also identified interim digital file sharing and the need to connect users, logistics organizations and manufacturers. Scaling that exchange requires attention to cybersecurity, file transfer and translation, and configuration management. The source noted that AM data practices and standards were still developing, while engineering data and requirements remained incomplete in some areas.
Designing for shipboard manufacturing
Shipboard AM introduces constraints that do not arise in the same way in a conventional laboratory. NAVSEA’s afloat research agenda included outfitting a limited number of platforms, establishing secure ways to transfer digital files, identifying ship modifications and assessing equipment and materials in non-static environments.
Installation planning had to account for:
- Networking or approved standalone operation of the equipment.
- Electrical requirements for industrial machinery.
- Available space, mounting and shock considerations.
- Training needs, equipment use cases and which platforms should be prioritized.
At the time, shipboard equipment installation used a Ship Change Document. NAVSEA also described the need for a more defined set of installation requirements—a “green box” covering matters such as power, mounting, computers, networking and infrastructure. Further work included evaluating motion profiles, including high-frequency vibration, recording ship motion data and developing representative mounting approaches to support qualification.
Connecting AM to maintenance and logistics
AM’s operational usefulness depends partly on identifying the right components. NAVSEA proposed using existing logistics, supply and maintenance databases to find candidate parts based on mission impact and readiness needs. Its roadmap included cataloging and provisioning guidance, search capabilities, and procedures to trace shipboard AM components and manage risk.
This data-driven approach helps avoid treating every difficult-to-source component as an AM candidate. Application decisions still need to account for technical suitability, material and process controls, and the level of approval required. Supply chain integration is therefore not just a matter of adding digital files to a repository; it links part identification to engineering authority and component history.
Examples from the USS John C. Stennis advanced manufacturing lab show how AM can support maintenance workflows without necessarily producing the final service part. Sailors modeled and printed a prototype hanger door bolt requested for USS Chung-Hoon, made design changes based on fit, and used the model to machine a final metal bolt. The reported machining time for each bolt was up to six hours. The lab also produced replacement calibration-equipment knobs that restored the availability of a machine otherwise requiring replacement, along with smaller items such as plugs and caps.
These examples demonstrate prototyping, fit checking and replacement-part support. They do not remove the need to determine which material and manufacturing route are acceptable for the finished component.
Practical implications for industrial teams
NAVSEA’s experience highlights several considerations for organizations introducing AM into maintenance operations:
- Define the application and authority. Establish what the part must do, where it will be used and who can approve its design and production.
- Control the production definition. Maintain the technical data needed to identify approved materials, equipment and process conditions.
- Plan infrastructure early. Address power, space, mounting, networking and secure file handling before installing equipment at the point of use.
- Integrate with asset and supply data. Use maintenance and logistics information to prioritize applications and support traceability.
- Develop people and standards together. Engineers, operators, acquisition teams and maintainers need appropriate AM knowledge, supported by evolving specifications and qualification methods.
Conclusion
Additive manufacturing in naval maintenance is most effective when treated as an enterprise capability spanning engineering, production, logistics and shipboard infrastructure. NAVSEA’s strategy paired practical experimentation with approval processes, technical data requirements, standards development and supply chain integration. For automation and maintenance leaders, the central lesson is to establish controls and operating requirements alongside equipment capability. That foundation helps teams evaluate where AM can support readiness while keeping component qualification, cybersecurity and traceability in view.
Access Official Technical PDF