📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for CNC Machining Capabilities: Equipment and Applications. This engineering resource is curated under our CNC Machining division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

Understanding CNC machining capabilities starts with more than a list of machine names. For engineers, system integrators and production planners, the useful details are the operations available, the dimensions a machine can accommodate and the process steps that can be combined. VDL Systems’ CNC machining department inventory, revised July 2020, lists equipment for tube laser-cutting, sawing, turning, milling, drilling and tapping. Together, these resources describe a broad set of metalworking processes; the listed figures provide a starting point for assessing part fit and production routing.

Tube laser-cutting for tubular components

The inventory includes a Bystronic FL170 fiber-laser tube-cutting machine, installed in 2019. Its listed laser power is 3 kW, with a maximum tube diameter of 160 mm and a maximum stainless-steel thickness of 5 mm. These limits are useful early checks when considering whether a tube profile and material thickness fall within the machine’s stated range.

Tube laser-cutting can support the preparation of tubular parts before downstream fabrication or machining. When planning a job, teams should confirm that the tube dimensions and material meet the relevant machine limits, then consider how cut features relate to later operations such as sawing, turning or assembly. The inventory specifies stainless steel for the thickness limit; it does not provide thickness limits for other materials.

Sawing equipment for stock preparation

Several saws are listed, including semi-automatic mitre saws, a semi-automatic circular saw and a fully automatic saw. This mix represents options for cutting material to length or preparing angled cuts, subject to the capacity of the selected machine.

  • Jaespa 265 mitre saws: Two machines are listed, with maximum height of 260 mm each.
  • Jaespa 240GT mitre saw: Listed with a maximum height of 240 mm.
  • Kaltenbach KKS400 circular saw: Maximum height is 110 mm and maximum length is 6,000 mm.
  • MEGA H330 GA automatic saw: Maximum height is 330 mm and maximum width is 350 mm.

The stated dimensions are not interchangeable: the inventory gives height for the mitre saws, height and length for the Kaltenbach, and height and width for the MEGA. Confirming the relevant workpiece orientation and cross-section is therefore essential before assigning a job. The inventory dates from 2020, so current machine availability and specifications should be verified before production planning.

CNC turning capabilities

The turning section includes CNC turning centres, several equipped with barfeeders, and two entries that specify a subspindle. These configurations are relevant when assessing how a job may be supported from bar stock or whether operations can be carried out using the listed main- and subspindle arrangements. The inventory does not describe cycle times or the operations possible on each specific part, so those details require application-level review.

Among the listed machines, the Doosan Puma 2600LSY has a stated tube diameter of 80 mm, length of 1,250 mm, maximum diameter of 480 mm and spindle speeds of 4,000 rpm and 6,000 rpm for the subspindle. The Victor V-turn 26/110 is listed with a 75 mm tube diameter, 900 mm length, 300 mm maximum diameter and speeds of 3,500 rpm and 4,500 rpm at the subspindle.

Other turning centres include the Doosan Puma 3100LY, with a listed tube diameter of 103 mm, length of 1,280 mm and maximum diameter of 420 mm, and the Doosan Lynx 220LM, with a 51 mm tube diameter, 510 mm length and 320 mm maximum diameter. The inventory also lists a Doosan Puma 2100M with a BMO Robot loader, and a Victor V-turn 26-2. These machine-level figures help screen workpieces, but final suitability depends on the actual part geometry and setup.

CNC milling and drilling

VDL Systems’ listed milling equipment ranges from machines with substantial axis travel to a conventional milling centre. The Hedelius C60/2500 has XYZ travel of 2,500 × 620 × 520 mm and a 3,000 × 600 mm table. The Hedelius C80/3200 has 3,200 × 810 × 550 mm travel and a 4,000 × 750 mm table. Both are listed at 12,000 rpm.

The Doosan Mynx NM510, listed with a TEQQ automatic loader, has XYZ travel of 1,020 × 510 × 600 mm and a 1,200 × 500 mm table. The Victor V-center 125 has 1,250 × 600 × 610 mm travel and a 1,400 × 550 mm table. A conventional TOS F2V milling centre is also listed, with 590 × 400 × 300 mm travel and a maximum speed of 2,000 rpm. These distinctions can inform initial routing decisions between CNC and conventional milling, while the specific workholding and machining plan still need to be assessed.

For drilling, the inventory includes a CMA TRD CN 40 coordinate-drilling machine with XYZ travel of 4,500 × 600 × 400 mm. Its listed spindle speed is 3,000 rpm, and the drilling speed is 5,000 rpm. Threading equipment includes electric and pneumatic Roscamat machines. The listed thread-size ranges are M3 to M30 for the electric unit, M3 to M12 for one pneumatic unit and M3 to M30 for the other.

Using the inventory in production planning

For technical decision-makers, this equipment list is most useful as an initial capability map. Match a component’s material, dimensions and required operations against the listed machine limits, then confirm details that the inventory does not cover, such as tooling, tolerances, workholding, process sequence and present-day availability. A part may pass one machine’s dimensional check yet still require a different route based on its features or production requirements.

In practical terms, the listed combination of tube laser-cutting, sawing, turning, milling, drilling and tapping provides multiple process options for metal components. Treating each machine’s stated capacity as a screening reference—and validating the full job before release—helps engineers and planners make more informed routing decisions.

Access Official Technical PDF