📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for AMR Safety LiDAR: Designing Safe Person Detection. This engineering resource is curated under our Autonomous Mobile Robots division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

AMR safety lidar is not simply a matter of detecting a person in a sensor’s field of view. For autonomous mobile robots (AMRs), person protection depends on how sensing performance, the control system, the operating environment and the machine’s safety functions work together. IEC TS 62998-1 provides a framework for developing and integrating safety-related sensors when product-specific sensor standards do not cover all the necessary requirements.

For automation engineers and integrators, the practical challenge is to establish what the sensor must detect, under which conditions, and how its information contributes to a validated safety function. A LiDAR device may be one part of that solution, but the safety case concerns the complete application.

AMR safety lidar starts with the safety function

Safety is the reduction of risk to a tolerable level through technical and organizational measures. In a mobile robot application, person protection may involve monitoring people or relevant objects so that hazards can be addressed. Object monitoring for collision avoidance and person detection can overlap in an application, but the safety purpose and requirements need to be clearly defined.

A safety function typically involves an input, logic and an output. For example, a sensor provides information to a safety-related control system, which then initiates an appropriate response through the machine’s outputs. The sensor therefore cannot be assessed in isolation: its role and performance must be considered as part of the control system and the overall risk-reduction strategy.

Component-first and system-level design

A component-first approach uses certified safety components and established product standards to build a machine-level function. The IEC 61496 series, for example, specifies design and performance requirements for electro-sensitive protective equipment (ESPE) intended to detect people. It also defines equipment types and test requirements for the scope it covers.

This approach can support modular designs, but its guidance applies within defined boundaries and conditions. A system-level approach instead starts with the application’s safety requirements, separates the required functions, and selects suitable components for the solution. The system may include both safety-rated and non-safety components, provided their roles and contribution to the safety function are properly addressed.

Neither approach removes the need to assess the complete application. The appropriate design depends on the hazards, the required safety performance and the standards that apply to the machine and its components.

What IEC TS 62998-1 adds for safety-related sensors

IEC TS 62998-1 addresses safety-related sensors (SRS) and safety-related sensor systems (SRSS) used to protect people. Its scope is relevant when protection relies on sensors, functional-safety standards treat those sensors as part of a control system, and product-specific sensor standards do not provide all necessary provisions or have not been developed for the application.

The terminology helps distinguish individual sensing arrangements from a system that combines sensors. An SRS is one or more sensing units combined to perform a safety-related function. An SRSS is a combination of two or more safety-related sensors performing that function.

The specification also defines concepts that matter when multiple sensing sources are involved:

  • Alignment: processing measurements to establish a common time base and spatial reference.
  • Diversity: using different means or design approaches to perform a required function.
  • Fusion: combining or associating data to improve detection, identification or characterization.
  • Redundancy: providing more than one means of performing a function.

These terms do not, by themselves, establish that a system is safe. The design still needs to show that its sensing and processing meet the safety requirements for the intended application.

Follow an application-focused lifecycle

The IEC TS 62998-1 process connects sensor development to the conditions in which the sensor system will be used. It begins with an application risk assessment and definition of safety requirements for the sensors within the control system. The SRS is then designed with attention to its systematic behavior, detection capability and safety-related function.

Verification and integration follow. The system’s systematic capabilities are examined through analysis, simulation and/or testing, and the integrated solution is validated. The process also includes providing information for use and considering measures during maintenance. This lifecycle view is important because safety performance depends on correct integration and continued use within the specified conditions.

Environmental limits and detection performance

AMRs may operate amid temperature changes, humidity, rain, snow, fog, icing, sunlight, vibration, shock, sand, dust or biological influences such as insects and mould. The sensor manufacturer or SRSS integrator should identify environmental influences relevant to safe operation and demonstrate that the safety-related functions perform within the stated limits.

Some conditions may need field validation when they cannot be fully addressed through defined limits alone. This makes the intended operating environment a design input, not an afterthought. A sensor validated for one set of conditions should not automatically be assumed suitable for a different deployment.

Detection capability also needs to be expressed in a way that supports the application’s safety requirements. The presentation includes an example of a performance-class-B sensor system with illustrative values for demand rate, coverage probability, measurement uncertainty and accuracy. Those values are an example, not universal requirements for AMRs; required values must be determined for the particular safety function and application.

Document performance and validate the complete solution

Information for use should state the applicable performance level (PL) and/or safety integrity level (SIL), as appropriate, and identify the standards used to examine systematic capabilities. The material distinguishes these safety-performance measures from the SRS/SRSS performance class, which it says should not be stated on the product label. Integrators should consult the applicable standard and manufacturer documentation when interpreting ratings and their relationship.

For plant teams, the key implication is to make safety requirements traceable from risk assessment through sensor selection, environmental limits, control-system integration and validation. A LiDAR device can contribute to person detection, but safe operation depends on the verified performance of the complete safety-related function under its intended conditions. Treating sensor choice, system design and lifecycle information as connected tasks gives engineers and decision-makers a stronger basis for deploying AMRs responsibly.

Access Official Technical PDF