Additive manufacturing in the nuclear industry is being explored for more than geometrically complex parts. It may also offer practical options for replacing components, supporting maintenance, reducing reliance on external suppliers and tailoring material or design to a specific function. But nuclear applications demand a high level of confidence in both the material and the manufacturing process. Progress therefore depends on building a complete chain of design, production, inspection and qualification.
Why consider additive manufacturing for nuclear applications?
Nuclear facilities may need relatively small quantities of particular components, including parts that are difficult to source or reproduce through conventional manufacturing. Additive manufacturing (AM) builds an object by adding material layer by layer from digital design data. Depending on the process, this can enable production of replacement parts, repair or cladding of existing components, and designs that integrate features that would otherwise require multiple parts or manufacturing steps.
These possibilities are relevant to maintenance as well as new designs. For example, a valve handle can be digitized and recreated using a powder bed fusion workflow: capture the original geometry, process the three-dimensional point data, generate a model and manufacturing file, then prepare and build the part. This approach illustrates how digital tools and AM processes can be combined for replacement-part work. It does not, by itself, establish that a component is ready for nuclear service; qualification remains essential.
Additive manufacturing in the nuclear industry: process options
Two metal AM families illustrate the range of potential applications. Powder bed fusion (PBF) selectively fuses powder in successive layers. It has been investigated for replacement parts and components with complex geometry, including fuel-assembly grids and calibrated-pore filters. These studies examine whether a component can be produced as a single part or with a redesigned structure, while also confronting practical issues such as part dimensions and surface roughness.
Directed energy deposition (DED) feeds powder or wire into a melt pool created by an energy source. It can be used to build material onto a component, produce near-net-shape forms, or apply a coating. Nuclear-related development work has explored internal cladding of tubes with hardfacing materials, as well as adding material for repair or manufacturing. In one cladding study, the work included parameter development on plates and trials on tubes, with heating used to address cracking concerns.
These processes are not interchangeable. The choice depends on the component, material, geometry and intended task. Both also require careful consideration of finishing: an as-built part may need machining, surface treatment or heat treatment before it can meet its intended requirements.
Design and materials are part of the process
AM can create opportunities to rethink a component rather than simply reproduce its conventional design. Examples under study include lattice or structured materials, functionally designed pores and geometry optimized for a particular purpose. A fuel-assembly grid study, for instance, explored producing a component as one part instead of assembling a main piece with separate welded rails. The work also identified dimensional limits and surface roughness as important challenges.
Material development is equally important. In PBF-produced 316L stainless steel, process parameters can influence microstructure, including whether grains are columnar or more equiaxed. Mechanical testing has reported tensile properties above the cited RCC-MRx requirements for the material studied, while further work—including irradiation testing and component testing—was identified as necessary. Results for a material or test specimen should not be treated as automatic evidence of component qualification.
Other research directions include high-entropy or complex-composition alloys for properties such as corrosion, wear and thermal resistance. Composition gradients are also being investigated as a way to address difficult junctions between dissimilar materials, where metallurgical incompatibility or stress cracking may be concerns. These approaches expand the design space, but they add further needs for characterization and process understanding.
Qualification requires control across the manufacturing chain
For nuclear use, promising geometry or mechanical test results are only part of the evidence required. Materials need assessment for relevant service conditions, including high-temperature mechanical behavior, corrosion and irradiation response. The manufacturing process must also be robust and repeatable, with monitoring and control sufficient to understand how production conditions affect the resulting material.
Qualification work extends beyond the machine. A complete AM pathway may include:
- Design and digital preparation: AM-specific design, manufacturing optimization, reverse engineering and reliable data handling.
- Process development: Selection of the process and parameters, supported by modelling and simulation of material behavior and solidification.
- Inspection and characterization: Microstructural and mechanical assessment, corrosion and irradiation testing where required, and suitable non-destructive examination.
- Post-processing: Machining, surface finishing and heat treatment as appropriate to the part and process.
- Standards and codification: Development of guidance and nuclear-code provisions that address AM materials and manufacturing routes.
Inspection methods cited in AM development include X-ray, ultrasound and eddy-current testing. Their use must fit the part and the inspection objective. The broader challenge is to validate continuity across the chain—from material feedstock and design data through production, finishing and final characterization—rather than treating the printer as a self-contained solution.
What industrial teams should take away
Additive manufacturing can create opportunities for nuclear replacement parts, maintenance, repair, cladding and new component designs. Demonstrations involving valve handles, tube cladding, fuel-assembly components and filters show the range of work being explored. They also make clear that manufacturing feasibility is only one milestone.
For engineers, integrators and plant decision-makers, the practical implication is to assess AM as a qualified manufacturing route, not simply as an alternative machine process. Each application must account for material behavior, process control, dimensions, production time, surface condition, finishing, inspection and the applicable nuclear requirements. Continued development of standards, technical skills and validation methods will be central to moving promising AM applications into dependable industrial use.
Access Official Technical PDF