Collaborative robots, or cobots, give manufacturers another way to automate tasks performed near human operators. Unlike conventional industrial robots that are commonly separated from people by fencing, cobots are designed with features such as mechanical compliance or force-feedback detection that can stop motion when contact occurs. That can make shared workspaces possibleâbut it does not make every cobot application safe by default. Choosing the right task requires balancing workspace, payload, speed, tooling and the risks of human interaction.
What makes collaborative robots different?
Traditional industrial robot cells often rely on a physical barrier and safety controls to keep operators outside the robotâs working area while it is moving. If a person needs to enter that area, the robot may need to stop or be prevented from reaching the operator. This arrangement can be effective, but guarding takes floor space and can complicate access to the process.
Cobots are intended to operate in closer proximity to people. Their contact-detection or compliant features can trigger a stop if the robot touches a person or object. Depending on the application and its safety assessment, this can reduce the need for extensive guarding and allow an operator and robot to work alongside one another.
The potential operational benefits include:
- Reducing the floor space needed for a work cell and making use of existing factory layouts.
- Allowing an operator to perform a task nearby without routinely moving the robot out of the way or shutting it down.
- Making it easier to relocate a robot between stations without removing and reinstalling barriers.
- Reducing some installation and cell-coordination requirements compared with a conventionally guarded robot cell.
These characteristics can make cobots attractive to small and medium-sized manufacturers seeking to automate manual processes. The actual cost and integration effort, however, depend on the application and the safety measures it requires.
Where collaborative robots fitâand where they do not
Payload and speed are important considerations when comparing cobots with conventional industrial robots. The source material describes cobot payloads as generally lower, with most models at the time rated for 10 kg or less and the largest cited at 35 kg. Conventional industrial robots can handle substantially heavier loads. These differences make cobots better suited to lighter material handling and operations that do not demand the capacity of a heavy-duty robot.
Cycle time is another trade-off. Cobots may operate more slowly than traditional industrial robots, in part because speed can be limited to reduce the impact of a potential collision. Safety scanners can be used to detect an operator entering a work area and trigger a speed reduction. Padding may also help reduce impact forces. Such measures do not remove the need to assess the complete cell and its operating conditions.
Repeatability is another factor to evaluate against process requirements. Cobots have historically lagged some conventional robots in this area, although the gap has been changing as established robot manufacturers develop collaborative products. Rather than assuming either category will meet a requirement, engineers should verify performance against the tolerances and cycle demands of the specific task.
Safety depends on the whole application
A collaborative robot is not automatically safe in every configuration. The robotâs motion is only one part of the risk picture: the end effector, workpiece, fixtures and process can also create hazards. A knife or welding torch, for example, can remain dangerous even when mounted on a cobot. Guarding may still be necessary to control those risks.
Before deploying a cobot, teams need to identify possible contact scenarios and assess the forces that could be transferred during an impact. The robotâs settings and the cell design must be configured so that the resulting conditions meet applicable safety requirements, and the relevant forces must be verified. Safety planning should therefore cover the full applicationânot just the robot model or its built-in functions.
Promising cobot applications in manufacturing
Cobots are often a better fit for tasks with moderate cycle-time demands, lighter payloads and tooling that is safe or can be made safe. Their compact, flexible use can also be useful where production space is limited or where automation is introduced into an existing manual process.
Potential applications include:
- Machine tending and material handling
- Assembly, including screw insertion
- Inspection, sorting and packaging
- Dispensing and sealing
- Sanding and polishing
The right choice depends on how the task interacts with the operator. In some processes, a cobot can handle a repetitive step while the operator performs a related task in parallel. For example, a robot inserting screws into an electronics assembly could work alongside an operator building the product. A two-armed cobot dispensing potting material into electronic coils is another example of automation designed to allow parallel work.
Assess the process before selecting a robot
A useful evaluation starts with the manual operation and the production objective, rather than with a particular robot. Map the task, identify where an operator must interact with the process, and determine the required payload, reach, cycle time and repeatability. Then consider whether the end-of-arm tooling and workpiece can be handled safely in a shared space.
Comparing collaborative automation with a conventional robot cell can clarify whether closer human-robot interaction offers a practical benefit. Feasibility testing can help teams examine the process and equipment needs before committing to a production implementation. If the application requires high speed, heavy payloads or hazardous tooling, a conventional guarded systemâor a different cell designâmay be more appropriate.
Conclusion
Collaborative robots can help manufacturers automate lighter tasks, use constrained floor space and keep operators involved in nearby work. Their value depends on selecting applications that suit their payload, speed and repeatability, and on assessing the complete cell for hazards. For engineers and operations leaders, the practical next step is to evaluate the task, tooling and human interaction together, then verify that the chosen configuration meets production and safety requirements.
Access Official Technical PDF