Collaborative robots can automate pick-and-place work, but their reach may not cover every position in a packaging or palletizing cycle. A cobot linear axis adds a controlled movement axis beneath the robot, allowing the robot base to move vertically as the task changes. Ewellix LIFTKIT is a ready-to-mount linear axis designed to extend a collaborative robot’s operating range and help address applications such as stacking boxes on pallets.
Why add a linear axis to a collaborative robot?
A standard collaborative robot has a defined working range. In palletizing, that range must accommodate both the low starting position and the increasing height of a growing stack. If the required vertical range exceeds what the robot can reach effectively, the system needs another way to reposition the robot relative to the pallet.
With a vertical linear axis, the robot’s base can be raised or lowered during operation. This changes the robot’s working position without requiring the robot to reach the full height difference through its own joints alone. For packaging system designers, the axis provides an additional degree of movement to incorporate into a multi-axis layout.
The same principle can support other handling tasks where the robot needs to work at different heights. Whether an added axis is suitable depends on the application’s reach, payload, layout, controls and safety requirements.
LIFTKIT operating range and mechanical design
LIFTKIT uses a telescopic pillar intended for industrial use. The product information describes vibration-free motion and virtually maintenance-free operation. The listed standard stroke options range from 500 to 900 mm; longer travel, up to 1,400 mm, is available on request. The compact retracted length is specified as the stroke divided by two, plus 275 mm, excluding mounting plates.
The technical data lists a push load of 1,500 N, a speed of 80 mm/s and a positioning repeatability of ±1 mm. The listed pull load is 0 N. The pillar has a 163 × 163 mm cross section and an IP40 protection rating, with an ambient temperature range of +10 to +40 °C. These values should be considered during application design alongside the robot, end effector, workpiece and mounting arrangement.
For a palletizing application, system designers can assess the required vertical travel by considering the starting height, maximum stack height and the robot’s usable reach at each position. The axis stroke alone does not establish application suitability; the complete robot cell must be evaluated.
Control options and robot integration
LIFTKIT is available in configurations for Universal Robots and for other robot manufacturers. The UR version is compatible with the listed UR3, UR5, UR10 and UR16 robots, including e-Series models. It uses a URCaps plugin that integrates axis positioning into the UR Polyscope environment. The product is described as Universal Robots+ certified.
In the UR software, users can manually move the axis during setup and define application-specific positions. During program development, a LIFTKIT command module can be inserted into the robot program. The documentation also describes reading and setting positions through a script function. This lets the programmer coordinate axis movement with the robot’s existing motion sequence.
The general-purpose LIFTKIT-00 option uses digital I/O for control and provides an RS232 interface for external software control; control software is not supplied with this configuration. It offers two programmable memory positions, with output signals indicating when those positions are reached. The UR version supports access to any position and provides position feedback through URCaps.
Electrical options listed include 24 V DC and AC configurations for different markets. The system also includes an emergency-stop connection to the robot’s safety I/O. The exact interface, voltage option and cabling arrangement should be confirmed when specifying the equipment and designing the cell.
Planning the installation and safety system
Before selecting a configuration, integrators should verify robot compatibility, required stroke, available installation space and mounting needs. The product documentation includes a robot attachment plate for the UR version, while the LIFTKIT-00 configuration does not include a robot interface plate. The pillar also provides threads for cable-management attachments. Cable routing and the placement of the controller and power supply should be incorporated into the cell layout.
Control integration does not make the linear axis a complete functional safety system. The manufacturer states that LIFTKIT is not compliant as a functional safety system with EN ISO 13489-1 or IEC 62061. If the axis is to be included in a functional safety chain, external safety devices must be integrated into the overall system. Safety assessment and system design should therefore address the robot, axis and surrounding equipment as a whole.
Practical implications for packaging automation
Adding a vertical axis can give a collaborative robot more reach for tasks such as palletizing, where working positions change as a load is built up. LIFTKIT provides mechanical stroke options and control configurations for Universal Robots and other robot systems, but engineers still need to confirm that the selected travel, interfaces and installation details suit the application.
For plant teams and system integrators, the key is to treat the axis as part of the complete automation cell: coordinate its movement with robot programs, plan mounting and cable management, and provide the external safety measures required by the application. With those considerations addressed, a cobot linear axis can be a practical way to extend vertical working range in packaging and material-handling systems.
Access Official Technical PDF