LPWAN technology offers transportation agencies a way to connect low-power sensors across areas where wired or broadband communications are limited. For applications such as traffic and environmental monitoring, it can provide long-range wireless links while keeping data rates and device power requirements relatively low. Those advantages do not make it a universal substitute for broadband: the right fit depends on the data being sent, network coverage, device placement, and the reliability required by the operation.
A Virginia Transportation Research Council investigation examined the potential of low-power wide-area networks (LPWANs) for transportation system management and operations through a literature review, a survey of transportation professionals, and conceptual tests using LoRa. Its findings offer a practical starting point for agencies considering connected sensors, particularly outside areas with established communications infrastructure.
Where LPWAN technology fits in transportation
Intelligent transportation systems rely on communications to move field data to the systems used for monitoring and operations. Fiber and commercial broadband can support these connections, but extending infrastructure and maintaining service can be costly, and coverage may be limited in rural and suburban locations. LPWAN is one possible option for connecting distributed devices without requiring a high data rate.
Potential uses include traffic data collection, weather and environmental sensing, parking monitoring, work-zone applications, and smart lighting. These applications often involve sensors sending small messages periodically rather than continuous streams of high-resolution data. That pattern aligns with LPWANâs strengths: broad-area connectivity and low power, with more limited bandwidth than technologies designed for high-throughput or real-time communication.
The distinction matters when selecting a network. A sensor reporting temperature or occupancy is not equivalent to a camera transmitting images or a device requiring frequent control updates. LPWAN should be assessed against the actual payload size, reporting interval, latency, and reliability needs of each use case.
Choosing between unlicensed and cellular LPWAN
LPWAN options vary in how they use spectrum and who operates the network. Unlicensed technologies, including LoRa, generally require the deploying organization to provide and maintain the relevant infrastructure, such as gateways. Licensed options, including NB-IoT and LTE-Cat-M1, rely on cellular network infrastructure and service availability.
LoRa was selected for the studyâs lab tests because it was a prominent LPWAN option with commercially available equipment. LoRa defines the radio physical layer; LoRaWAN provides the network protocol and architecture. In a typical LoRaWAN arrangement, sensor nodes communicate with one or more gateways, which forward information to a network server.
LoRaâs low-power, long-range design can suit small sensor messages, but its data rate and range trade off against one another. Its operating parameters must be selected for the application and local conditions. Licensed cellular LPWAN may be more appropriate when higher data rates or operator-managed connectivity are required, but performance depends on cellular coverage. The reportâs review also describes other technologies, each with different characteristics and trade-offs; the technology name alone does not establish suitability for a particular site.
What the LoRa tests revealed about coverage
The tests used a MultiTech gateway and several sensor devices. Indoor testing ran for a week, with devices positioned about five feet apart. The reported message success ratios were approximately 98.28% for one sensor type and 98.46% for another. Even with short distances and clear line of sight, some messages were missed, underscoring why a successful connection at one moment is not the same as dependable long-term service.
Outdoor tests were shorter: researchers checked communication at selected rural and urban locations for about 10 minutes per site. In the rural test, only a few messages were received, including messages at a distance close to 1.25 miles. In the urban tests, the results varied by location, device, and gateway mounting position. The report summarized the tested LoRa coverage as around one mile, but this should be treated as an observation from a particular setupânot a guaranteed planning radius.
Several factors affected communication:
- Distance: Messages were generally more likely to arrive at closer locations, though distance alone did not explain every result.
- Line of sight and obstacles: Buildings and other obstructions could impede signal propagation, so sites at similar distances did not necessarily perform alike.
- Mounting height: Raising the gateway affected coverage, but the relationship between height and performance was not simple or uniform.
- Device differences: The tested sensor types did not perform identically; one type received more messages in some outdoor comparisons.
These findings make site-specific testing essential. A theoretical maximum range or a result from an open area cannot by itself predict performance along a built-up roadway or inside a facility.
Plan field tests around operational requirements
The survey and literature review indicated that LPWAN use in U.S. transportation was still at an early stage when the study was conducted. Many surveyed professionals were unfamiliar with the technology, and concerns included security, implementation costs, and maintenance. Respondents identified traffic data collection, environmental sensing, traffic operations, and smart lighting as possible application areas.
Before deployment, agencies and integrators should define what the communications link must accomplish and test the relevant conditions. A field evaluation can vary gateway and sensor heights, distance, device type, node count, and deployment environment. It should measure both message success ratio and latency over a meaningful period, rather than relying only on brief connection checks.
Other questions may require separate tests: Can the network handle the intended number of nodes? Is downlink communication needed, or is periodic uplink reporting sufficient? Are payloads small sensor readings or larger files such as images? How do reporting frequency and battery consumption change under the planned operating schedule? The study proposed further field work to investigate these issues, including data size, transmission frequency, device differences, and cybersecurity considerations.
Conclusion: validate the network at the site
LPWAN technology can be a useful communications option for transportation sensors where long-range, low-power links are more important than high bandwidth. The LoRa tests demonstrate both the potential and the limits: messages traveled across meaningful distances, but reception depended on device type, mounting height, obstacles, and location. For engineering and operations teams, the practical next step is to match the technology to the application and validate it in the intended environment. A measured field trialâcovering reliability, latency, capacity, power, and securityâprovides a stronger basis for deployment decisions than range claims alone.
Access Official Technical PDF