📘 Resource Overview & Documentation Details

You are viewing the technical directory listing for Digital Occlusal Splint Manufacturing: Scan to Print. This engineering resource is curated under our Digital manufacturing division to support automation specialists, control systems engineers, and manufacturing technicians looking for verified reference materials.

🔍 Contextual Abstract & Technical Scope

Share Summary:LinkedInEmail

Digital occlusal splint manufacturing brings several connected technologies into a single production workflow: intraoral scanning, digital bite registration, computer-aided design (CAD) and 3D printing. For dental teams and laboratories, the important engineering challenge is not simply capturing tooth surfaces. The upper and lower arches must also be related accurately so the designed appliance reflects the intended jaw position and available space.

A clinical workflow described by Venezia and colleagues demonstrates how those steps can be linked to produce an occlusal splint. Although the application is dental, the process illustrates broader principles of digital manufacturing: capture reliable input data, verify how separate datasets align, design against the recorded relationship, and inspect the physical output before delivery.

Digital occlusal splint manufacturing: the workflow

Conventional splint production typically begins with physical impressions that are poured into stone casts. The casts are mounted on an articulator using a facebow registration and a wax record of the bite. The appliance is then fabricated from the mounted models. A digital process replaces much of this physical chain with scan files and virtual models, but it still depends on a clinically appropriate jaw-relation record.

The workflow in the reported case followed these main stages:

  • Record the desired occlusal relationship using a wax index.
  • Scan the maxillary and mandibular arches separately.
  • Scan the buccal surfaces with the wax index in place to capture the arches’ relationship.
  • Review scan quality and align the datasets in software.
  • Design the splint in CAD software using the digital models.
  • Produce the appliance with a multi-jet 3D printer.
  • Check fit and occlusion in the patient’s mouth and make any required adjustments.

Capturing the jaw relationship digitally

In the case report, the clinician first used bimanual manipulation to position the mandible in centric relation. A warmed, double-layer wax index recorded that relationship while leaving space for the planned appliance. This record provided the reference for the digital bite registration; the intraoral scanner did not determine the jaw position on its own.

The maxillary and mandibular arches were scanned, followed by a scan of the buccal surfaces with the wax index in place. The scanning software used the relevant landmarks in this bite-registration scan to relate the two arches. The resulting datasets could then be digitally mounted in the same intermaxillary relationship represented by the wax record.

This is a critical point for integrators of digital workflows: individual scans and their alignment serve different purposes. A detailed surface model is useful only if the relationship between the models is also captured and checked. In this workflow, the physical index established the relationship, while the digital scans transferred it into the design environment.

CAD design and additive production

The scan data were exported as an STL file and imported into dental CAD software. The virtual models were mounted in a virtual articulator, and the recorded bite relationship and occlusal space informed the appliance design. The design specified a mandibular-retained splint, with the upper teeth contacting the appliance.

Once the design was complete, the splint was produced using multi-jet 3D printing and a dental acrylic-resin material. The digital file forms an important part of the workflow: it preserves the design data, making it possible to reproduce the appliance from the saved project if a replacement is required. As with other digital manufacturing processes, keeping track of the approved design and its associated scan data helps maintain a clear link between the captured geometry and the manufactured part.

The authors noted that production could potentially take place in a dental office as well as in a laboratory. In their case, design and production were delegated to a dental technician familiar with CAD software and 3D printers. That distinction matters operationally: having equipment on site does not, by itself, determine where a workflow is most practical. The team must also account for the design work and production tasks involved.

Verification remains part of the process

After printing, the clinician evaluated retention and occlusion in the patient’s mouth. The reported appliance had optimal retention and required minimal occlusal adjustment. Contacts were checked with articulation paper and shimstock, and protrusive and lateral movements were assessed for interference.

These checks close the loop between the digital design and the physical device. A successful CAD model is not a substitute for fit and contact verification. The reported case demonstrates one way to inspect the appliance after manufacture, but its results should not be read as a universal performance guarantee. The authors also described symptom improvement in this individual patient; that case outcome does not establish the same result for every patient or treatment plan.

Practical considerations for clinics and laboratories

The reported workflow offers several operational considerations for teams evaluating digital production:

  • Input quality matters. Arch scans must provide sufficient data, and the bite-registration scan must support accurate alignment.
  • Preserve the reference relationship. The recorded jaw position and the resulting digital mounting are central to the appliance design.
  • Plan for design expertise. CAD design and printer operation may be assigned to a laboratory or undertaken in the clinic, depending on the team and workflow.
  • Retain digital files. Saved project data can support reproduction of the appliance when needed.
  • Include clinical inspection. Retention, contacts and jaw movements still require assessment at delivery.

The authors reported that office time in their case was similar to a conventional procedure, while laboratory procedures were less complex and the delivery appointment required little adjustment. These observations are specific to the described case and workflow; they should not be treated as a quantified time-saving claim applicable to all settings.

Conclusion

Digital occlusal splint manufacturing connects intraoral scanning, bite registration, CAD design and additive manufacturing while retaining clinical verification as a final step. Its practical value depends on correctly recording the jaw relationship, aligning scan data, designing the appliance against that reference and checking the printed result. For clinics and laboratories, the workflow can reduce reliance on physical casts and support reproduction from saved digital files, while leaving important decisions about design, production location and patient fit in the hands of the clinical team.

Access Official Technical PDF