A 3.5-inch HMI can provide a compact operator interface for equipment where panel space is limited and control information needs to be accessible at the machine. The SP3-GT35 combines a color touchscreen and function keys with Modbus RTU communications, alarms, recipe management, and data logging. Reviewing its display, interfaces, memory, and installation requirements helps determine whether it fits a particular control-panel design.
Display and operator interface
The SP3-GT35 uses a 3.5-inch TFT LCD with a resolution of 320 × 240 pixels and 256 colors. An LED backlight illuminates the display, while an analog resistive touchscreen provides touch input. The front panel also includes five function keys and one system key, giving operators physical controls alongside the touch interface.
For equipment designers, these details define the available interface format: a small color display, touch operation, and dedicated keys. Screen layouts and controls should be planned to suit the display area and the way operators interact with the machine. The unit’s overall dimensions are 99 × 99 × 62.85 mm, and its specified panel cutout is 92 × 92 mm.
Communications and printer connection
The HMI provides three serial connections for communications and printing. Its listed interfaces and roles are:
- COM1: RS232 using Modbus RTU in slave configuration.
- COM2: RS485 using Modbus RTU in master configuration.
- COM3: RS232 for a serial printer, using ESC/PAUSE.
The connections use a DB9 connector for the RS232 slave port, screw terminals for the RS485 master port, and an RJ25 connector for the printer port. Serial communication is half duplex, with selectable speeds of 9,600, 19,200, 38,400, 57,600, or 115,200 bps. Configuration options include none, odd, or even parity; one or two stop bits; and eight data bits.
When planning an installation, engineers should match the required master or slave role and physical connector to the connected controller or other device. The printer connection is a separate serial interface, rather than one of the Modbus RTU ports. The HMI is configured using Windows-based software.
Data logging, recipes, and alarms
The SP3-GT35 supports data logging and recipe management, with both functions using an external SD card. Alarm functionality is also listed. External storage is provided through a microSD slot, with support for cards up to 2 GB. The card can be installed by pushing it into the slot until it clicks; removal uses the same push-and-release action.
These functions can support applications that need stored operating data, selectable recipe information, or operator notification of alarms. The source specification does not define logging intervals, the number of recipes, or alarm capacity, so those requirements should be checked during application design rather than assumed from the feature list.
Internal memory totals 16 MB, allocated as follows:
- Recipe memory: 1 MB
- BMP memory: 4 MB
- Font memory: 4 MB
- Application memory: 0.5 MB
- System-reserved memory: 6.5 MB
The separation of these allocations is relevant when preparing screens and other HMI resources. External microSD storage is specified for user memory, data logging, and recipes; it should not be confused with the listed internal memory allocation.
Timing, security, and operator feedback
The specified minimum scan time is less than 100 ms, while typical scan time is 400 ms. Actual typical performance depends on the application. These figures are useful planning information, but they do not by themselves establish how quickly a particular screen or control task will respond. Application complexity should be considered when assessing timing needs.
Password protection is available with 10 password levels, allowing access to be organized by level. The HMI also includes a software-programmable buzzer, with a specified sound output of 85 dB at 10 cm. A hardware real-time clock has battery backup, and the backup battery is a replaceable 3 V CR2032. Timer displays can use seconds, minutes, hours, days, and combined formats such as minutes:seconds, hours:minutes, and days:hours.
Electrical and environmental requirements
The unit operates from an 18–30 V DC supply and has a maximum power consumption of 4 W at 24 V DC. Its specified operating temperature range is 0 to 50°C, and the storage range is -30 to 85°C. The listed humidity rating is 95% RH. The device is panel mounted and weighs 275 g.
These ratings give panel designers basic criteria for checking supply availability, enclosure conditions, and mounting space. Confirm that the intended installation falls within the stated operating conditions and provides the required cutout and access to the serial ports, buzzer, battery cover, and microSD slot.
Assessing fit for an application
The SP3-GT35 brings together a compact touchscreen interface, function keys, Modbus RTU over RS232 and RS485, printer connectivity, alarms, password levels, and SD-based data and recipe storage. Its specifications are most useful when compared directly with an application’s communication architecture, operator-interface needs, storage requirements, and panel constraints.
Before selecting the HMI, verify the required Modbus role and serial settings, confirm that a 3.5-inch display suits the information operators need, and check whether the external-card approach meets the application’s data and recipe requirements. Also account for the stated power, temperature, cutout, and memory limits. This review connects the feature list to practical integration decisions and helps establish whether the unit is an appropriate fit for the control panel.
Access Official Technical PDF